ArtBistro

How To >> Browse Articles >> How to Make Painting Supports

Applying an Acrylic Ground to Canvas

Before applying paint to your stretched canvas, you must apply a ground consisting of sizing (glue which protects the cloth fibers from the degenerative effects of oil paint) and primer (a base coat which allows paint to stick well and provides a consistent, all-over color). Utrecht Acrylic Gesso is both sizing and priming in one, and prepares any appropriate support to receive oil, alkyd or acrylic paint.

Sizing:

Although technically not a critical step, some artists choose to apply an acrylic or PVA sizing underneath gesso to seal the nap of the cloth and preserve a tight stretch. Utrecht Acrylic Canvas Sizing is ready to use for this purpose.

Priming with Acrylic Gesso:

Step 1: The first coat of Gesso applied to the canvas should be thinned to the consistency of thick cream so that it can penetrate the weave of the canvas.

Step 2: Apply the first coat using a stiff brush. Utrecht’s Bristle Gesso Brush leaves a subtle surface, but may shed a minimal number of bristles during the first use; Utrecht’s Nylon Gesso Brush will shed no hairs, but will leave a more textured surface. Use strokes parallel with the long dimension of the canvas. When the entire canvas is covered, allow to dry to the touch.

Step 3: A second coat should be painted on top, again in the same direction. This second coat, when dry, should be lightly sanded.

Step 4: Apply a final coat of Utrecht Gesso. The last coat should not be sanded, as some texture should remain to allow good paint adhesion.

Step 5: Finally, all four sides of the canvas should be coated with gesso, covering staples or tacks. When completely dry, the canvas is ready to accept oil, acrylic or alkyd paints.

Find art supplies

“Priming a Canvas with Oil or Alkyd:http://www.artbistro.com/training/articles/303-priming-canvas-with-oil-or-alkyd

How to Stretch a Canvas